Orthopedic medical fiberglass splint for arms or legs

angda Splint is used for orthopedics, which consists of a knitted fiberglass fabric and water-activated polyurethane resin. Specification and Size Type        Code No.   

Featured Products

angda Splint is used for orthopedics, which consists of a knitted fiberglass fabric and water-activated polyurethane resin.
 
Specification and Size
 
Type        Code No.     Size                Package
3in×12in  KD312     7.5cm×30cm     20Rolls/Box
3in×36in  KD336     7.5cm×90cm     10Rolls/Box
4in×16in  KD416    10.0cm×40cm    20Rolls/Box
4in×30in  KD430    10.0cm×75cm    10Rolls/Box
5in×30in  KD530    12.5cm×75cm    10Rolls/Box
5in×46in  KD546    12.5cm×115cm   5Rolls/Box
 
Characteristics 
 
1 20 times stronger and 5 times lighter than the traditional plaster cast
 
2 Harden fast :functional stength will be achieved in 20 mins
 
3 Good air-permeability ,Water-proof,Good X-ray radiolucence
 
4 Easy operating and no harm to patients
 
 
Storage
 
Be careful not to break the package.
Store KANGDA Splint(Poly) at room temperature.
NOTE: Storage at higher lower temperatures may affect the shelf-life and handing properties of the product.
Damaged products by careless handing cannot be replaced. Please handle and store them carefully.
 
The shelf-life of KANGDA Splint(Poly) stored by the above method is about three years.
 
Operation
 
1.After opening a bag, soak the whole set into lukewarm water for 20-30 seconds.
2.Wipe-out excess water on both sides with dry cloth
3.Attach GR-2000 splint to affected area and apply the bandage around splint to fix.
4.All the above process will take only 5 minutes
 
Recommended Amount of Usage
 
Size        Use
2in   Children's hands, fingers, and toes
3in   Children's wrists, ankles, and arms and legs
4in   Children's legs and ankles, adults hands and wrists
5in   Adult's arms and legs
6in   Adult's arms and legs
 
Warning
 
1. The higher the water temperature is, the faster KANGDA Splint(Poly) hardens.
2. The setting time becomes shorter as the water absorption time increases.
3. KANGDA Splint(Poly) can be used without immersing it in water if slow setting is needed. It may take approximately 15 minutes for the splint to harden without immersion in water.
4. The thick side of non-woven fabric should be applied to the desired area of the patient
Orthopedic Medical Fiberglass Splint for Arm or Leg
Orthopedic Medical Fiberglass Splint for Arm or Leg
Orthopedic Medical Fiberglass Splint for Arm or Leg

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours